Quick Start Guide

Connecting the hardware to your TV

1. Connect the included HDMI cable from the Playon!DVR

to your TV for the highest quality video/audio.

2. Connect one end of the included power adapter jack to your

Playon!DVR

and the other end to your wall power socket.

3. Connect the included Antenna to the ‘antenna in’

connector on your Playon!DVR

4. To make the player part of your network you can connect

your player to your network by using a normal network cable

or optional Playon! Wireless dongle (both not included).

Alternative options: If your TV does not have a HDMI input, you

can use the included composite cable for both video and audio

or the component cable (up to 1080i resolution) for video and

the composite cable (red /white) for audio.

If you have an Audio/Video Receiver you can connect your

audio / video signals through it to receive audio and video

with a HDMI, Composite, Component, SPDIF Coaxial or SPDIF

Optical TOSLINK cable.

***SPDIF Optical TOSLINK and SPDIF coaxial cables (not included)

supports up to 5.1 surround sound. For rich HD Audio in 7.1

surround sound you need to use a HDMI cable.

ENGLISHENGLISH