Operation Manual

- Enter Setup > Misc and then select Online upgrade to check for any available updates
- Press OK when the system finds a new version and prompted to update
*Please take note that the system may appear irresponsive for 10mins or more during
the downloading process.
2. System flash
- Copy the install.img file to the root directory of a FAT32 formatted USB flash drive
- Plug in to an available USB host port
- Enter Setup > Misc and then select USB upgrade
- Press OK when the system prompted to update
3. Safe-mode flash
- Copy the install.img file to the root directory of a FAT32 formatted USB flash drive
- Plug in to an available USB host port
- Switch off the main power
- Press and hold on to the power button on the front panel and at the same time, switch on
the main power
- Release the power button when the update starts flashing on your screen
Please ensure that power is not interrupted during the flashing process.
5 Appendixes
5.1 Specifications
I/O INTERFACES SUPPORTED:
 Gigabit Network Adapter
 Built-In Wireless N Adapter
 3.5’’ SATA HDD (not included)
 USB 3.0 Slave port (compatible to USB 2.0 )
 4x USB 2.0 Host port (compatible to USB 1.1)
 Composite (CVBS) A/V jack
 Component Y/Pb/Pr jack
 HDMI 1.4 interface
 S/PDIF Optical & Coaxial jack
 DC-IN 12V 3A
NETWORK FEATURE
 10/100/1000Mbps Auto-Negotiation Ethernet
 802.11b/g/n Wireless LAN
FILE SYSTEM SUPPORTED:
 FAT/FAT32/NTFS/HFS+/EXT3