Operation Manual

Night Mode
- Choose among Off / On / Comfort. If the option is turned on, the audio volume will be
dynamically adjusted to make vocal more audible and loud scenes to soften for night
comfort.
HDMI Output
- Choose among HDMI LPCM, HDMI RAW, HDMI Auto to suit your setup. It is
recommended to choose HDMI Auto setting when you are connecting to an amplifier via
HDMI cable.
SPDIF Output
- Choose among SPDIF LPCM or SPDIF RAW to suit your setup.
Surround Sound
- Select to support only 5.1 channels audio or High Definition (HD) audio.
Lip Sync
- Select auto mode to correct lip sync problems automatically with supported
devices/displays via HDMI cable, or choose manual to set your own values.
Note: In RAW mode, all audio formats will be passed to the HDMI TV or digital amplifier for
decoding. Due to the bandwidth requirement, Dolby TrueHD and Dolby Digital Plus audio can
only be passed-though via HDMI cable, also the TV system must support up to 720p or above.
3.1.3 Changing Video Settings
Use this menu to configure video settings.