Operation Manual

- Digital Media Server, making your internal storage available to networked digital media
players (DMP) and digital media renderers (DMR).
DLNA DMR
- Digital Media Renderer, plays content received from a digital media controller (DMC),
which will find content from a digital media server (DMS).
Host Name
- Default network name of your player is PLAYONHD3D, select this option to rename to
your desired network name.
Keyboard input method
- Select to change the language of the on-screen keyboard.
Rescan storage
- Select to set the scan mode of your media files.
Resume Play
- Select to turn on / off resume playback (auto-bookmarking) feature for movies.
Format
- Select to format your HDD.
BD-Lite Menu
- Select on to enable support for BD Profile 1.0 navigation menu.
CEC
Consumer Electronics Control, turning this on allows you to command and control up to ten
CEC enabled devices that are connected through HDMI, by using just one of the device’s
remote control. This player supports the following modes
- One Touch Play, allows devices to switch the TV to use it as the active source when
playback starts.
- One Touch Standby, allows you to switch the player to standby mode with the press of
the power button.
- Auto Power On from TV, allows you to power on the Player when the TV is powered on.
Auto standby
- Select between 30 minutes, 1 hour or 2 hours to put the player to power standby when it is
left idling after the selected time.
Restore Default
- Select to reset the player back to factory defaults.
3.1.2 Changing Audio Settings
Use this menu to configure audio settings