Installation Sheet

7
3
3. Level the bathtub and do the
water draining test. Then romove
the the unit for final installation.
3. Mettez la baignoire à niveau et
procédez procédez au test d’éva-
cuation d’eau. Ensuite, passez à
l’unité pour l’installation finale.
3. Nivele la bañera y haga la
prueba de drenaje de agua. Luego,
abandone la unidad para su insta-
lación final.
4. Install the drain and the over-
flow on the bathtub.
4. Installez le drain et le trop-plein
sur la baignoire.
4. Instale el desagüe y el des-
bordamiento en la bañera.
Fix the wood edges underneath
the tub if necessary.
Stabilize the bathtub with mortar
and reinstall.
Fixez les bords en bois sous la
baignoire si nécessaire.
Stabiliser la baignoire avec du
mortier et réinstaller.
Fije los bordes de madera debajo
de la tina si es necesario.
Estabilice la bañera con mortero y
vuelva a instalar.
4
3.1