BadgeR+ Product Manual Developed by 911Cellular www.911cellular.com support@911cellular.com 216.283.
BadgeR+ Product Manual Developed by 911Cellular This Product Manual is intended to give you the guidance you need to effectively configure and use the BadgeR+ wearable device. In addition to using this document, we encourage you to take advantage of the wealth of information available at www.911Cellular.com/BadgeR+Maunal. If at any time you have questions, need help, or have suggestions for how to improve this Product Manual, please contact Support@911Cellular.com Device elements 1. 2. 3. 4. 5. 6. 7.
BadgeR+ Product Manual Developed by 911Cellular ● Press and hold Each mode can be configured by your organization to correspond to a specific type of alert. Please ask your manager for specific information about how your organization has configured the alert button. Element 2: Status / Pairing Button The button performs two functions: 1. Pressing and releasing the Status / Pairing Button triggers a connection test and a remaining battery check.
BadgeR+ Product Manual Developed by 911Cellular One of the three LEDs is flashing Your battery has less than 10% of its total capacity remaining and should be charged immediately. The three LEDs are cycling between on and off The battery is currently being charged. Element 4: Status Indicator Light This single LED light performs two functions: 1. The light will illuminate a solid green color to indicate a successful activation of the Alert Button.
BadgeR+ Product Manual Developed by 911Cellular Charging Your Device Each BadgeR+ is shipped with a USB-C charging cable. Plug one end of the cable into a power source, and the other end into your BadgeR+. To see if the device is charging, press the Status / Pairing Button. Caring For Your Device While the electronics are enclosed in a sturdy case, it is still important that you keep your device away from water, as it may damage the components.
BadgeR+ Product Manual Developed by 911Cellular a separation distance between the user's bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
