Data Sheet

ouble Join
t Arm Short (360mm)
Visit www.9.solutions for more info.
5/8” pin with 3/8”-16
female thread.
pi
n with 3/8”-16
emale
thread.
Single-point tightening mechanism
locks both ball joints simultaneously.
The Double Joint Arm has ball joints on both ends that a
re locked
into position by a single-point tightening mechanism.
Each ball joint has a 5/8＂ pin with a 3/8＂-16 female th
read, making
it easy to mount and position lights, cameras, monitors, or a w
ide
variety of equipment at any angle.
Please always follow the safety standards and regulations of the given country where the product is being used.
Item: 9.VD5089S
The Double Joint Arm comes in four sizes:
Double Joint Arms should be mounted in
a secure 5/8” receptacle, such as the 9.Solutions’
Barracuda Clamp.
Double Joint Arm Short (360mm)
s for
purchasing a 9.Solutions product. With great passion,
e design
our products to be as versatile as possible. We hope
p
roducts contribute to your creative vision.
y,
.Solu
tions Team
Visit www.9.solutions for more info.
Double Joint Arm Short (260mm)Double Joint Arm Short (360mm)
SPECIFICATIONS:
Weight: 680 g
Length: 360mm
Max Load: 14 kg
Connection(s):
(2x) 5/8” Pin with 3/8”-16 Female Thread
Package Contents:
(1x) Double Joint Arm Short (360mm)
Please always follow the safety standards and regulations of the given country where the product is being used.
The Double Joint Arm comes in four sizes:
Double Joint Arms should be mounted in a
secure 5/8” receptacle, such as the 9.Solutions’
Barracuda Clamp.
Thanks for purchasing a 9.Solutions product. With great passion,
we design our products to be as versatile as possible. We hope
that our products contribute to your creative vision.
Sincerely,
The 9.Solutions Team
The Double Joint Arm has ball joints on both ends that are locked
into position by a single-point tightening mechanism.
Each ball joint has a 5/8＂ pin with a 3/8＂-16 female thread, making
it easy to mount and position lights, cameras, monitors, or a wide
variety of equipment at any angle.
5/8” pin with 3/8”-16
female thread.
5/8” pin w
ith 3/8”-16
female thread.
Single-point tightening mechanism
locks both ball joints simultaneously.
Item: 9.VD5089S