User_Manual

Tilted and vertical movement:
8
To easily tilt the C-Pan Arm II into a vertical or sloped position,
move the arm out to the right side and (while holding the arm
firmly) loosen the green fulcrum handle and tilt the arm to the
desired position.
Set the arm at any desired angle from horizontal to vertical.
Always insure that the rosette teeth intermesh correctly when
tightening down the green handle. Do not let go of arm before
having insured that the fulcrum connection is secured.
Adjust camera tilt plate to accommodate the position of the
arm.
C-Pan Arm II can be set at any sloped angle between 0 and 90
degrees at intervals of 15 degrees. Do not set it in-between
where rosette teeth don't lock it securely in position.