User_Manual

Set curved movements:

Subject Subject Subject

1. Align the camera lens and the

C-Pan Arm II with the subject.

2. Move arm out to one side. 3. Loosen the adjustment handle

and slide it to the right. Slide it until

the camera lens lines up with the

subject again. Tighten adjustment

handle.

To maintain the most accurate curve, do not

move the arms all the way to the maximum

position.

The curvature of the movement becomes parabolic

the further it gets to the maximum position.

When moving the C-Pan Arm II in a straight or curved movement, do not extend the

arm all the way to where the two arms touch the hinges.

When operating the C-Pan Arm II, do not jolt the arms back and forth or make it abruptly stop or start.

This could be damaging the gears and lead to increased backlash in the whole mechanism.