Manual

X-Input: press and hold START+X for 3 seconds, blue LED blinks twice to indicate mode activation.
D-Input: press and hold START+B for 3 seconds, blue LED blinks twice to indicate mode activation.
macOS: press and hold START+A for 3 seconds, blue LED blinks twice to indicate mode activation.
Sleep mode - 15 minutes with wireless connection but no use.
· Please visit support.8bitdo.com for further information and additional support.
· Built-in 180 mAh Li-on with 25 Hours of play time.
· Rechargeable via USB cable with 60 minutes charging time.
SN30 2.4G and SF30 2.4G
1. Plug the 2.4G Retro Receiver into your NES / SFC / SNES Classic Edition.
2. Press START on your controller to connect to the Retro Receiver.
3. LED will be solid blue when connection is successful.
Connection
1.ConnectthecontrollertoyourWindows/macOS/AndroidviatheUSBcable.
2. LEDwillbesolidbluewhenconnectionissuccessful.
Windows/macOS/Android (wired connection)
• Default mode: D-input.
Power LED in red
Power LED in green
Power LED turns off
SN30 2.4G and SF30 2.4G
设备连󳍺
󲘝󳍺󳙑󱬽󳏄󱌇NES/SFC/SNESClassic⼿柄端⼝，轻按START键󱙱可连󳍺，连󳍺󱝠蓝灯
⻓󰹮。
*󲁶连󳍺丢失或重󳜞󸓔配󳍺󳙑󱬽，可⻓󳉾SELECT键3󵨳进󱌇配󲘇状态,蓝灯快󸔠闪烁，连󳍺
成功󱝠，蓝灯⻓󰹮󷞎⽰配󲘇成功。
NES/SFC/SNESClassic（ 󳝾线连󳍺）
Windows/macOS/Android(有线连󳍺,有线󰼐先)
⽤USB线󲘝⼿柄连󳍺󱑍Windows/macOS/Android设备USB󵱯⼝，连󳍺󱝠蓝灯⻓󰹮。
󳉾󰽟3󵨳[START+X]键:Xinput模式,蓝灯闪两下󷞎⽰成功。
󳉾󰽟3秒[START+B]键:Dinput模式,蓝灯闪两下󷞎⽰成功。
󳉾󰽟3秒[START+A]键:macOS模式,蓝灯闪两下󷞎⽰成功。
*默认Dinput模式。
电󴙃
电量状态
指⽰灯状态
电量不⾜
红灯󰹮
󱋏电中
绿灯󰹮
󱋏电󲔥成
绿灯熄灭
内󶔩180mAh锂电池，可持续使⽤约25⼩时,󱋏电时间约60󱐕钟。
15分钟⽆操作会⾃动休眠。
NES/SNES/SFC Classic Edition (wireless connection)
• Home Menu Access for NES/SNES/SFC Classic Edition.
SELECT + DOWN = RESET
• If connection is lost or you wish to pair with a new retro receiver, press and hold SELECT on the 
controller for 3 seconds. Blue LED will rapidly blink and be solid blue when connection is successful.
DOWN+SELECT
(Resetbutton)
START
(to power on controller)
DOWN+SELECT
(Resetbutton)
START
(to power on controller)