Deployment Guide
# 7sonar loglevel
Log level is INFO
Use “7sonar config set” to change the configuration parameters:
● 7sonar config set name <name>
: change the Sonar name
● 7sonar config set port <TCP port number>
: change the Sonar TCP port number
● 7sonar config set maxclients <number of clients>
: change the maximum number of
concurrent clients
● 7sonar mosstart <UDP port number>
: change the first UDP port number in MOS UDP port
pool
● 7sonar mossize <number of ports>
: change the MOS UDP port pool size
Use “7sonar loglevel set” command to change the log level (available levels are DEBUG, INFO, WARN
and ERROR):
# 7sonar loglevel set <log level>
Step 3: Start the Sonar server:
Issue the command:
# 7sonar start
5
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, info@7signal.com, www.7signal.com