Deployment Guide

The username and password for both the Carat Server and Sonar Server VM’s are shown below:
Username: 7admin (with sudo access)
Password: 7admin
NOTE! It is recommended to change VM’s default passwords. Root password can be found from
the VM template Readme document
3. Specifications
Settings of the virtual images are listed below.
Carat Server VM (1-25 Eyes):
CPU 4
RAM 6114MB
HD 450GB (thin provisioned)
Sonar Server VM:
CPU 4
RAM 6114MB
HD 40GB (thin provisioned)
This is default configuration. Server configuration depends on the number of sensors.
Configuration should be adjusted according to 7signal server requirements.
4. Configuration Instructions
Step 1: Login to Carat server VM using “root” or “7admin” user:
If “7admin” user is used to login to Carat server VM, please type in “sudo su -” for root access.
Step 2: Assign a static IP address to Carat server VM:
The IP address of Carat server is obtained by DHCP in default. Use system-config-network-tui to
uncheck “Use DHCP” for eth0 and assign a static IP address (with root access) according to your
network settings:
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, info@7signal.com, www.7signal.com