Deployment Guide

Set the port of the Eye management interface (optional – default is TCP/7999):
# 7config ip set port <port>
Verify all the entered settings with the ‘show’ command:
# 7config ip show
Disable DHCP
#7config ip set dhcp off
Step 3: Reboot Eye unit
Reboot the Eye unit to make the changes effective:
# reboot
4.3 Configuring Eyes to connect a Carat server
Starting with Sapphire release 5.2, it is now possible to configure the Eyes to connect to the Carat server
(before release 5.2, Carat server always initiated the connection to the Eyes). The Eyes can be configured
to connect to Carat by several ways:
1. Manual configuration. The Carat server IP address, port numbers and organization name are
configured for each Eye by using 7config utility
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, [e-mail], www.7signal.com