Deployment Guide

Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
Antenna
This device has been designed to operate on internal antennas or with an external patch type antenna
having a maximum gain of 6dBi. Antennas having a gain greater than 6dBi are strictly prohibited for
use with this device. The required antenna impedance is 50 ohms.
Notes to the user
Any unauthorized modification of 7signal products may result in a violation of FCC requirements which
would void the user’s authority to operate the equipment.
● The FCC ID for the 7signal Sapphire Eye IEEE802.11a/b/g Eye Unit is YLF-2010-08-APU2.
● The FCC ID for the 7signal Sapphire Eye, Model 1001 (802.11a/b/g/n), is YLF-EYE-ABGN-APU3
● The FCC ID for the 7signal Sapphire Eye, Model 2001 (802.11a/b/g/n) is YLF-INEY2001.
● The 7signal Sapphire Eye Model 2100 (802.11a/b/g/n/ac) Contains FCC ID: YLFSE2100WL.
● The 7signal Sapphire Eye Model 500 (802.11a/b/g/n/ac) Contains FCC ID: YLFSE2100WL.
● The 7signal Sapphire Eye Model 2200 (802.11a/b/g/n/ac-wave2) Contains FCC ID: YLFSE2200WL.
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, [e-mail], www.7signal.com