Deployment Guide

VALUE = Gain of external antenna (dBi).
cable Set cable loss of external antenna.
VALUE = Cable loss of external antenna cable (dB).
Examples:
Show all information in TX power configuration:
# 7config txp show
Show configured cable loss:
# 7config txp show cable
Set external antenna gain to 10 dBi:
# 7config txp set ext 10
10.8 Log command group
This command group contains commands for configuring log production of the Eye. Logs can be produced
either to a ring buffer on RAM (Eye 1000/2000) or to a RAM disk (Eye 2100/500/2200) (this is the default,
can be read by logread command), or to persistent storage on NAND flash. In 802.11a/b/g, the persistent
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, info@7signal.com, www.7signal.com