Deployment Guide

Reconfigure the Eye:
# 7config run reconfig
10.7 Txp command group
This command group contains commands for showing and setting of TX power related parameters.
Currently supported operations are showing of TX power settings, setting default TX power, setting gain of
an external antenna and setting cable loss of the external antenna.
7config txp [ARG] [VALUE]
'show' command arguments:
default Show default TX power.
ext Show configured gain of external antenna.
cable Show configured cable loss of external antenna.
If no arguments given, all information will be shown.
'set' command arguments:
default Set default TX power.
VALUE = TX power (dBm).
ext Set gain of external antenna.
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, [e-mail], www.7signal.com