Deployment Guide
To change logging back to ring buffer, use the following command:
# 7config log set target buffer
The following command shows the log level and log target information:
# 7config log show
7.3 Eye 2100/500/2200 log
NOTE: As this is for Eye logging, all the below commands are to be entered at the prompt of the
Eye, not on the Carat or Sonar server.
7.3.1 Application logs
By default, application logs are stored to rotating log files in RAM file system /tmp directory. The name of
the log file is /tmp/7signal.log.
The logging can be directed to a persistent storage with 7config log – command. The name of the log file
is then /var/log/7signal.log.
7signal Solutions Inc., 6155 Rockside Road, Suite 110, Independence, Ohio 44131, USA,
216-777-2900, info@7signal.com, www.7signal.com