User Guide Part 2

23 7signal solution 131
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
23.1 Reporting change events
Change events are reported by using Management GUI.
Figure 76: Adding a change event
Select a desired topology element and right-click to open a popup menu:
 Access point
o Select “Change events” to report a change event for the access points.
o Select “Change events on this Eye” to report change event for the access point
under specific Eye.
 Eye
o Select “Change events” to report a change for the Eye.
 Link
o Select “Change events” to report a change for the link.
 Wireless network
o Select “Change events” to report a change for the wireless network
o Select “Change events on this Service Area” to report a change for the wireless
network on the specific service area
Change event dialog is opened. Enter information for the change event:
1. Select time of the change
a. Select date by clicking “arrow down” button.