User Guide Part 2

20 7signal solution 115
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
20.2.4 Adding alarm report item
Figure 67: Adding alarm report item
1. Select the desired alarm by left-clicking it in the right-hand pane
2. Right-click the alarm and select “Add alarm” in the submenu
a. One may remind oneself about the alarm by selecting “Description”
3. Repeat steps 2–3 until all of the desired alarms are in the left pane
4. Select “Next” to continue to “Report item topology configuration”. See chapter 20.2.6.
5. Select the time interval for the report. See chapter 20.2.6.
20.2.5 Adding map report item
1. Select the desired KPI by left-clicking it in the right-hand pane
2. Right-click and select “Add KPI” in the submenu
3. Click “Next” to continue to “Report item topology configuration”. See chapter 20.2.6.
4. Click “Next” to continue to “Report item time configuration”. See chapter 20.2.6.
20.2.6 Report item general options
All report item types have two configuration options: report item topology configuration and
report item time configuration. The general configuration options are asked after report item
specific options.
Report item topology configuration
The report item time configuration dialog contains two elements:
 Area aggregation selector
 Topology tree