User Guide Part 2

20 7signal solution 114
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
20.2.2 Adding KPI report item
Figure 66: Multiple KPI chart report item
3. Select the desired KPI by left-clicking it in the right-hand pane
4. Right-click and select “Add KPI” in the submenu
5. Repeat steps 2–3 until all desired KPIs are in the left pane (depending on chart type:
“Multiple KPI chart allows more than one KPI)
6. Select the Chart type
7. Select the method for displaying the measurement series in Chart content
8. Select the display method
a. Data Table, Aggregation Chart
9. Click “Next” to continue to “Report item topology configuration”. See chapter 20.2.6.
10. Click “Next” to continue to “Report item time configuration”. See chapter 20.2.6.
20.2.3 Adding SLA report item
.
1. Choose the topology elements of the report item. See chapter 20.2.6.
2. Click “Next” to continue to “Report item time configuration”. See chapter 20.2.6.