User Guide Part 2

18 7signal solution 98
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
18.14 Web page download test
This test is used for “downloading” actual WWW-pages.
Figure 57: Web page download test
To run the web page download test:
1. In the Network topology, select
a. the Eye that will run the test
i. Right-click and select ”Manual tests | Web page download test”
ii. Select an access point from the pull-down menu
b. Or an access point through which the test will be run
31
i. Right-click and select ”Manual tests | Web page download test”
2. Select test type, WLAN or Ethernet
a. If Ethernet test is chosen, DNS server IP address must be entered manually
3. Select the Eye’s IP address (DHCP or static)
32
a. If static, enter the (1) local IP address, (2) local net mask, (3) gateway, (4) DNS
server IP address
4. Choose URL from the box
a. To add a URL
i. Write a well-formed and proper address to the input box
ii. Select “Add URL”
b. To remove a URL
i. Activate the URL to be removed with a right-click
ii. Select “Remove URL”
5. Select “Execute”. Test progress information can be seen in “Test progress” area.
31
Meaningless if Ethernet test is chosen.
32
Only if WLAN test is chosen.