User Guide

5 Upgrading Sapphire 38
7signal Solutions Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail],
www.7signal.com
7signal Sapphire Deployment Guide Release 5.0
Installing 7carat tool...
Installing 7edp tool...
Modifying file permissions...
Creating uninstaller...
Saving configuration.
Done.
Upgrade is ready after installer finishes.
5.4 DBMS upgrade (Linux)
Step 1: Change to the Carat database installer directory:
# cd /root/SapphireXXYY/Carat-output/Carat_DBMS/linux
Step 2: Execute DBMS installer in upgrade mode:
32 bit systems:
Issue command:
# ./7signal-DBMS-X.X-Y.Y-i686-installer.bin upgrade
64 bit systems:
Issue command:
# ./7signal-DBMS-X.X-Y.Y-x64-installer.bin upgrade
NOTE: The upgrade command must be used in order to save old measurement data!
The DBMS installer starts to upgrade the DBMS. When the installer asks some upgrade parameters,
default values provided are applicable in most of the installations. Upgrade process may take several
minutes.
Checking md5sum .. OK
Checking tar .. OK
Checking tail .. OK
Checking awk .. OK
Extracting installer, please wait ...
Verifying installer, please wait ...
Checksum : 3f630f68384c9e9f785e3e086d559206
Calculated : 3f630f68384c9e9f785e3e086d559206
Unpacking data files ...
Launching installer.
Trying to locate existing installation...
Found existing DB installation.
Starting to upgrade.
DBMS location : /opt/7signal/dbms
Configured DB user is db7sign
Configured DB port number is 7722
DB2 installed to : /opt/ibm/db2
Current version : 4.1-0.0
Version to which upgrade: 5.0-0.0
Enter location of JRE [/opt/7signal/jre]: <enter>