User Guide

5 Upgrading Sapphire 34
7signal Solutions Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail],
www.7signal.com
7signal Sapphire Deployment Guide Release 5.0
5 UPGRADING SAPPHIRE
5.1 Copy the latest Sapphire release to the hard disk
(Linux)
Step 1: Create new directory to the Carat server:
# mkdir /root/SapphireXXYY
Step 2: Change to the installer directory:
# cd /root/SapphireXXYY
Step 3: Copy the Sapphire Carat CD (X.X-Y.Y) to the install directory:
# cp –r /<path to installation media>/* /root/SapphireXXYY/
IMPORTANT: When upgrading from versions prior to 5.0, certificate package file needs to
be available on file system of the Carat server host.
5.2 Stop Sapphire solution (Linux)
NOTE: All Sapphire components running on the Carat server must be stopped before
upgrade.
Step 1: Stop the Carat server:
Stop the Carat server by issuing the command:
# 7carat stop
Command output should be the following:
7signal Sapphire Carat is running
Shutting down 7signal Sapphire Carat: OK
7signal Sapphire Carat is not running
Step 2: Stop the Analyzer server:
Stop the Analyzer server by issuing the command:
# 7analyzer stop (7loupe stop in version 3.2 or older)
Command output should be the following:
Shutting down 7signal Analyzer server: JRE_HOME is now set to = /opt/7signal/jre