Setup Guide Part 1

15 7signal solution 58
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
15.1.2 Binding Alarm Groups to access points
Network alarms can be configured on a per-access-point basis by binding an alarm group to an
access point. Only an existing group can be bound to an access point.
1. In the Network topology, right-click the access point to which you want to bind the
alarms
2. Select “Bind to alarm group”
3. From the pull-down menu, select the alarm group you want to use for this access point
VoIP MOS, listen quality
Warning
Alarm is activated when
listening quality drops under
configured value.
Yes
VoIP MOS, Talk quality
Warning
Alarm is activated when Talk
quality drops under configured
value.
Yes
Ping Success Rate
Warning
Alarm is activated when Ping
success rate drops under
configured value.
Yes
TCP Success Rate
Warning
Alarm is activated when TCP
success rate drops under
configured value.
Yes
VoIP Success Rate
Warning
Alarm is activated when VoIP
test success rate drops under
configured value.
Yes
Internet Availability
Warning
Alarm is activated when
Internet availability is lost.
No
Attach availability
Critical
Alarm is activated by
consecutive attach failures
Yes
VoIP MOS, listening performance
Critical
Alarm is activated when
average MOS download value
consecutively drops under a
configured threshold value.
Yes
VoIP MOS, talking performance
Critical
Alarm is activated when
average MOS upload value
consecutively drops under a
configured threshold value.
Yes
TCP Download performance
Critical
Alarm is activated when
average TCP download
throughput consecutively drops
under a configured threshold
value.
Yes
TCP Upload performance
Critical
Alarm is activated when
average TCP upload throughput
consecutively drops under a
configured threshold value.
Yes
Beacon success rate
Warning
Alarm is activated when
beacons/probe responses are
not heard from the access point
Yes
Noise level exceeded
Warning
Noise level on channel has
exceeded configured threshold
values
Yes