Setup Guide Part 1

7 7signal solution 12
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, [e-mail], www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
Use a descriptive name, f ex NewConfigGroupForOrganizationX
3. Create a new configurator user to the Configurator group.
Use a descriptive name, f ex LocalConfigurator1.
4. Continue using Sapphire.
All other configurations related to network topology, test profiles, WLAN network
keys etc. should be made by the user LocalConfigurator1 to enable proper
operation of the automated object access rights management system.
Some top-level operations for Solution Administrator are explained right below
7.2 Automated Tests
Top-menu selection “Tools | Start automated testing” affects only those objects that are
accessible to the user issuing the command. Stopping works similarly.
Solution Administrator level user starts and stops testing system-wide i.e. all the monitoring
stations. Local Administrator may affect the monitoring stations only inside their own
administrative boundary i.e. only part of the monitoring stations start/stop. However it is
advised to use Configurator level users to manage automated testing.
7.3 Access Control
The “Access control” is an accessible pane in the “Manage” menu. When one follows the
intended way of user and group definition, the contents and actions in the “Access control”
pane are redundant. The feature remains activated but the use of it is discouraged and thus
not instructed in detail.
For sandbox testing and non-warranted try-outs: the left panel contains actual users and
groups and related access rights. The right panel contains all objects in 7signal Sapphire. With
combinations of right-clicks and drags&drops fine-level adjustment and changes to access
rights are possible.