User's Manual

20 Continuos And Automated Reporting 84
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.1
20.2.4 Adding alarm report item
1. Select the desired alarm by left-clicking it in the right-hand pane
2. Right-click the alarm and select “Add alarm” in the submenu
a. One may remind oneself about the alarm by selecting “Description”
3. Repeat steps 2–3 until all of the desired alarms are in the left pane
4. Select “Next” to continue to “Report item topology configuration”
5. Select the method of aggregation in Area aggregation
6. From the hierarchical tree presented, select the access points or networks to be
included in the report by ticking the check-boxes
7. Select “Next” to continue to “Report item time configuration”
8. Select the time interval for the report
a. History uses pre-defined intervals from the generation time backwards
b. Calendar allows free interval definition
9. Time aggregation defines the averaging period for the report item
10. Click finish to return