User's Manual

18 Manual tests 72
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.1
To run the SIP test:
1. Select the SIP server to register to
a. From the pull-down menu
i. SIP end-point has to be defined as a test end-point to be selectable
b. Arbitrary IP address
i. Enter IP address and the port
2. Select an access point
3. Select the Eye’s IP address (DHCP or static)
a. If static, enter the (1) local IP address, (2) local netmask, and (3) gateway
4. Enter the SIP protocol specific parameters
a. Name is mandatory
b. If alone, the test is run as un-authorized
5. Select the wlan traffic category
6. Select “Execute”
The test result is two-fold: test setup information and SIP specific.
Test setup information contais:
- attach time
- dhcp retrieval time
- Eye IP address used in wlan interface
- The gateway
SIP results contain:
- used IEEE802.11e traffic category
- SIP server response for REGISTER: SIP protocol code
- Register time, milliseconds
- Authentication information (optional)
- SIP server response for UNREGISTER: SIP protocol code