User's Manual

13 Access Point Information 37
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.1
To retain the measurement history with a new hardware:
1. Scan the network to get hold of the new access point hardware
2. Right-click on the access point that has been replaced to summon the edit dialog
3. Locate the replace panel and choose from the drop-down list the new access point that
shall assume the role of the replaced access point.
The intended use of this feature is to help with replacing identical hardware. If the hardware is
not identical, the results may be many-fold. SLAs and alarm thresholds should be checked, for
example.
There is also possibility to enable automatic access point change logic in carat server. This can
be done configuring Wireless Network to allow automatic changes.
1. Open Edit Wireless Network by right clicking network in tree and selecting “Edit”
2. Enable “Allow automatic BSSID changes”
3. Save Wireless Network Configuration.