User's Manual

5 Upgrading Sapphire 42
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Deployment Guide Release 3.1
service 7signalLoupe restart : Restarts Loupe server
(Shortcut: 7loupe r)
service 7signalLoupe status : Shows if the server is running or not
(Shortcut: 7loupe status)
To learn more about the 7loupe-command, simply type command '7loupe'
without any parameters.
The Loupe server upgrade is ready when the installer finishes.
5.8 Sonar upgrade (Linux)
Step 1: Create install directory to the Sonar server:
# mkdir /root/SapphireXXYY/
Step 3: Copy the Sapphire Sonar CD (X.X-Y.Y) to the install directory:
# cp –r /<path to installation media> /root/SapphireXXYY/
Step 4: Change to the installer directory:
# cd /root/SapphireXXYY/Sonar/linux
Step 5: Execute Sonar server installer:
Start the installer by issuing the command:
# ./7signal-Sonar-X.X-Y.Y-installer.bin
The installer starts to upgrade the Sonar installation. Confirm the upgrade and accept the
current configuration:
Extracting installer, please wait ...
Launching installer.
Sonar installation found from /opt/7signal.
Do you want to upgrade [Y/n]? <enter>
Starting to upgrade.
Stopping Sonar..
Getting current configuration..
Checking that TCP port 80 is not in use.. Port 80 free.
Sonar configuration:
--------------------------------------------------
Server name : Sonar
Server port : 80
Max. clients : 10
MOS port pool start: 50000
MOS port pool size : 10
Log level : ERROR
Is this configuration OK [Y/n] <enter>
Copying Sonar to /opt/7signal...
Configuring Sonar...
Extracting jre...
JRE already installed, checking if it is up to date
Installed version: 1.6.0_06-b02