User's Manual

2 Using Loupe 4
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Loupe User Guide Release 3.1
2.1 Channel aggregation and selection
For the convenience of the user, the channels are separated by the IEEE 802.11 standards. The
support is for IEEE 802.11b/g, IEEE 802.11a and IEEE 802.11n. The channel list is dynamic is
based on the monitoring station country code setting. For example, one monitoring station
located in Finland would show channel 13 while a monitoring station in the same organization
but located in USA would not show that channel.
2.2 Saving the Charts
You can save the charts either individually under each chart or all at once by choosing Export
from the top right corner. You have two saving options:
1. CSV: a comma-separated text file, suitable for importing data into a spreadsheet
program
2. PDF: A Portable Document Format file suitable for printing.
Note! The options displayed in the browser might not look exactly the same in the
PDF. Some changes are made to make the printed document easier to read.
2.3 Advanced Chart Settings
You can view the details of the results by selecting Show raw chart and Show chart data next
to the chart (raw = all data points and samples without averaging). You can modify the charts
by choosing or editing the values above the chart listing:
1. Chart size
a. Small, Normal, Large
b. User-defined size