User's Manual

Preface i
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Loupe User Guide Release 3.1
PREFACE
Document scope
This document is aimed for people familiarizing themselves with 7signal Sapphire
measurements and the use of 7signal Sapphire Loupe. Case studies are included to introduce
typical analysis paths of wlan network quality shortcomings.
This document does not describe how the software operates or how to configure testing. The
actual use of various 7signal Sapphire applications is explained in detail in 7signal Sapphire
Carat User Guide. Software and hardware installation is explained in 7signal Sapphire
Deployment Guide.
FCC Warning
The radiated output power of the 7signal Sapphire Eye complies with the FCC RF exposure
limits. To avoid the possibility of exceeding the FCC radio frequency exposure limits, a distance
of at least 20 cm should be kept with the user and the device while operating.
The FCC ID for 7signal Sapphire Eye is YLF-2010-08-APU2 for
IEEE802.11a/b/g
FCC APPROVAL PENDING ON RELEASE DATE
The FCC ID for 7signal Sapphire Eye is YLF-EYE-ABGN-APU3 for
IEEE802.11a/b/g/n
This device is restricted to indoor-only use in 5150.0-5250.0 MHz and
5470.0 -5725.0 MHz bands
NOTE TO THE USER
Any uninstructed modification to the 7signal products may result in violation of FCC
requirements.