User's Manual

3 Tabs 6
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Loupe User Guide Release 3.1
3 TABS
Below the time selectors there are numerous tabs. The tabs divide KPIs by category and to
some extent follow the principle that the more abstract, derived or calculated high-level
indicators are on the left and the detailed, accurate and raw-level indicators are on the right.
As the amount of information is enormous and the displays may be limited, many of the
elements in the user interface may be expanded / collapsed.
3.1 Tabs and analysis
The typical analysis flow is expected to progress from left to right. The outcome and results on
the left are more abstract, more compounded and more processed than on the right. On the
other hand, the level of detail grows the more the tab is on the right.
Please find the troubleshoot analysis at the end of this manual to see a few examples of typical
analysis cases and how the user-interface supports those.
3.2 Tab memory
Each tab have individual save and reset buttons for selected configurations and graphs. By
default the selections are not saved but by pressing “Save tab configuration”, the selections
will be saved in next login. “Reset tab configuration” will return the settings to default.