User's Guide

20 Active Tests 70
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.0
ii. Enter primary DNS server
iii. Enter secondary DNS server (optional)
iv. Enter tertiary DNS server (optional)
v. Enter 1st network name to be resolved
vi. Enter 2nd network name to be resolved (optional)
vii. Enter 3rd network name to be resolved (optional)
3. Select “Execute”
The result-set is three-fold:
1. General results: IP address obtained, attach time, dhcp retrieval time and gateway
address.
2. Status of DNS servers
Results of the name resolving.
20.13 “SIP Register Test”
It is possible to run SIP REGISTER test in both unauthorized and authorized mode.
To run the SIP test:
1. Select the SIP server to register to
a. From the pull-down menu
i. SIP end-point has to be defined as a test end-point to be selectable
b. Arbitrary IP address
i. Enter IP address and the port
2. Select an access point from the Network topology
3. Select the Eye’s IP address (DHCP or static)
a. If static, enter the (1) local IP address, (2) local netmask, and (3) gateway
4. Enter the SIP protocol specific parameters
a. Name is mandatory
b. If alone, the test is run as un-authorized
5. Select the wlan traffic category
6. Select “Execute”