User's Guide

17 Test Measurements 50
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.0
The other approach is the create a simple test sequence as essid and then duplicate the essid
object and make the duplicates to point to different wlans. The resulting sample test profile
would be similar to the following:
1. FTP on Wlan1
2. MOS on Wlan1
3. Spectrum
4. FTP on Wlan2
5. MOS on Wlan2
6. Scan
7. FTP on Wlan3
8. MOS on Wlan3
Please observe that in the latter approach the measurements on a single wlan network shall
be sparser temporally. While individual tests shall happen on roughly the same time interval,
the distribution of the samples per network differs a great deal on these two approaches.
When planning the test cycles, one should bear in mind:
• The more tests there are in the sequence, the bigger the difference in sample
distribution.
• The more networks, the less samples for individual networks.
17.11 Running test profiles
Select “Tools | Eye auto tests management” to see current status of Eye units.
The Eyes of the user context are enlisted in the box on the right. The Eye name, the test profile
name and the state of the test profile run are indicated.
By selecting one of the Eyes brings additional information such as the run time and test profile
content on the left.
Buttons: