User's Guide

10 Setting Up Monitoring Stations 25
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.0
a. Antenna gain
b. Cable loss (measured or estimate)
9. Save the monitoring station settings by clicking “Save” or “Save and move to scan”; the
latter option places the added Eye in network scan mode
10.1.2 Monitoring Station Settings
1. Activate the monitoring station by right-clicking on it in the Network topology
2. Select “Edit”
a. This opens the settings window in the right pane
3. The settings window allows you to view and edit the following information about the
monitoring station:
a. Name
b. Description
c. IPv4 address
d. TCP port for management traffic
e. Test profile
f. Settings for the Eye’s heating resistor
g. Monitoring station’s uptime
h. Monitoring station’s current time
i. External antenna enabled or disabled
i. gain of the external antenna
ii. cable loss
j. Software versions and temperature of the monitoring station (in a table)
k. Information about the access points within the monitoring station’s range
4. You can also check the information you have entered for the access points:
a. Access point ID (AP ID)
b. Access point name (AP name)
c. The role of the access point with relation to this Eye (AP relation to Eye)
5. Click “Save” to save any changes you have made