User Guide

7 Physical Install of 7signal Sapphire Eye 20
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Deployment Guide Release 3.0
There shall be one install mechanics (pictured right below). Mount it on the wall on the
rectangular side. The longest side of the triangle should face towards the ground.
There are three elliptical holes in the wall-mount mechanics. Mount the Eye unit by pushing
the screws on top of the unit through the wall-mount mechanics. From the top-side of the
mechanics use the screws to attach the unit to the mechanics.
7.3 Pole Install
In pole install the wall-mount is attached to any pole by using mechanics (A and B, picture
below). Screw the part B on hook A in order to attach the wall-mount to the pole. Follow the
wall-mount instructions from here on.