User Guide

4 7signal Sapphire Connectivity 7
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Deployment Guide Release 3.0
4.1.1 Eye – Sonar connection
Conn
ID
Description
Data content
Listening
port(s)
Remarks
1
Test management and
typical test connection
Test control
message and
pseudo-data
tcp/80
Traffic is properly
encapsulated http. Uses Eye
wlan interface.
Configurable
in Sonar
deployment
2
MOS test, uplink
direction
MOS test
specific data
udp/50000 –
50009
Optional. Uses Eye wlan
interface. The number of port
varies between 0 and 20. The
port numbers are
consequtive. By default 10
ports are opened.
Configurable
in Sonar
installer
3
MOS test, downlink
direction
MOS test
specific data
udp/9999
Optional. Uses Eye wlan
interface.
Configurable
in Eye
deployment
Main purpose: Eye connects through wlan interface to the remote server that simulates or
emulates business applications.
Important notice:
this is most likely the most complex connection is 7signal Sapphire systems.
The Sonar servers may be numerous and the network topology between Eye and Sonar may
vary radically and could contain numerous firewalls. 7signal has no control over the network
topology and cannot influence arbitrary devices and network elements between the
endpoints. To ensure fluent deployment, the user/configurator has to have thorough
understanding of the network between the endpoints and possibility to affect all the elements
necessary.