User Guide

2 Requirements 4
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, +358 40 777 7611, info@7signal.com, www.7signal.com
7signal Sapphire Deployment Guide Release 3.0
2 REQUIREMENTS
2.1 Carat-server requirements
Carat server controls Eye units and collects measurement results to the database. Carat server
software can be installed to dedicated server or virtual environment.
The operating system is CentOS that is community version of Red Hat, the only difference are
in graphics and similar items. Carat server has management connection to the Eye units and it
can manage concurrently several Eyes in several locations.
The Carat server requirements are below:
x86 32-bit Intel and AMD processors
minimum 2 GB RAM
installation minimum 10GB Hard Disk Space required
database space: depending on target network size, (for reference, typical data
volume = uncompressed raw measurement data /AP/month = circa 50MB)
LAN connection
CentOS 5.4
2.2 Sonar-server requirements
Sonar is a light end-point software for Sapphire active tests. Sonar server software can be
installed to dedicated server or virtual environment.
Eye will connect to the Sonar and run application tests towards it. Sonars can be installed into
several locations in the network to simulate the real-life situation where various business
services are geographically distributed.
The Sonar server requirements are below:
x86 32-bit Intel and AMD processors
LAN connection
CentOS 5.4
There are no specific RAM or disk requirements as Sonar is truly a light-weight server software.
To best reflect the business-application behavior, Sonar server would benefit from similar
characteristics than the server running the business application. For example, the Windows
TCP/IP stack implementation may limit performance by default.