Application Guide

13 Continuos And Automated Reporting 24
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Loupe User Guide Release 3.0
SLA groups, in automated report only SLA group is combined with the elements that should
fulfill the SLA defined in the SLA group
The following sequence happens in “Report item topology configuration” pane. It open after
choosing SLA type of report item in the previous dialog.
1. Choose the appropriate aggregation in the drop-down box.
2.
3. Select the elements in the topology tree
4. Select the SLA group to be applied. Available SLA groups are in a drop-down menu on
the right of the topology element name.
5. Repeat steps 2-3 until all desired elements are bound to SLA groups.
6. Click “Next” to continue to “Report item time configuration”
7. Select the time interval for the report
a. History (in the picture above)uses pre-defined intervals from the generation
time backwards
b. Calendar allows free interval definition
8. Time aggregation defines the averaging period for the report item
9. Click “Finish” to return to first subscription page