User's Manual

To run the Internet availability test:

1. Select an access point from the pull-down menu

2. Select IP address

a. Use DHCP of the wlan network by checking the box

i. DHCP result shall affect other test parameters as the actual servers

shall be dictated by the result and the reliability is expected.

b. Use of static IP address configuration

i. enter the (1) local IP address, (2) local netmask, and (3) gateway

ii. Enter primary DNS server

iii. Enter secondary DNS server (optional)

iv. Enter tertiary DNS server (optional)

v. Enter 1st network name to be resolved

vi. Enter 2nd network name to be resolved (optional)

vii. Enter 3rd network name to be resolved (optional)

3. Select “Execute”

The result-set is three-fold:

1. General results: IP address obtained, attach time, dhcp retrieval time and

gateway address.

2. Status of DNS servers

3. Results of the name resolving.

“SIP Register Test”

It is possible to run SIP REGISTER test in both unauthorized and authorized mode.

To run the SIP test:

1. Select the SIP server to register to

a. From the pull-down menu

i. SIP end-point has to be defined as a test end-point to be selectable

b. Arbitrary IP address

i. Enter IP address and the port