QCA4020
Table Of Contents
- Purpose of the Document
- Document History
- 1 Introduction
- 2 QCA4020 miniPCIe Layout
- 3 QCA4020 miniPCIe Pin Out
- 4 How to flash Image to QCA4020 miniPCIe
- 5 QCA4020 Pin Out
- 6 Software Tools to be Installed
- 7 Setting Up the Software Development Environment
- 8 Importing “Hello World” Application
- 9 Building “Hello World” Application
- 10 Flash the Application to the QCA4020 miniPCIe using USB
- 11 Flash the Application to the QCA4020 miniPCIe using JTAG
- 12 Connecting QCA4020 to Serial Terminal Through UART
- 13 Using Serial Terminal
- 14 QCLI Demo Application
30
QCA4020 miniPCIe Copyright © 5GHUB.US
14 QCLI Demo Application
CLI demo application is a comprehensive demo that provides a mechanism to demonstrate different and
all features and technologies that QCA4020 miniPCIe supports. It also provides reference implementation
and usage of customer facing QAPIs.
The QCLI-demo application is available with the QCA4020 SDK and you can follow the same steps
described before in Eclipse to build and flash it
to the QCA4020 miniPCIe. Once flashed, you can see
the output on the serial terminal as in the screenshot below. Also, you can exercise connecting to
your home/office WLAN
The following screenshot shows how to connect to an WLAN access point.