QCA4020
Table Of Contents
- Purpose of the Document
- Document History
- 1 Introduction
- 2 QCA4020 miniPCIe Layout
- 3 QCA4020 miniPCIe Pin Out
- 4 How to flash Image to QCA4020 miniPCIe
- 5 QCA4020 Pin Out
- 6 Software Tools to be Installed
- 7 Setting Up the Software Development Environment
- 8 Importing “Hello World” Application
- 9 Building “Hello World” Application
- 10 Flash the Application to the QCA4020 miniPCIe using USB
- 11 Flash the Application to the QCA4020 miniPCIe using JTAG
- 12 Connecting QCA4020 to Serial Terminal Through UART
- 13 Using Serial Terminal
- 14 QCLI Demo Application
27
QCA4020 miniPCIe Copyright © 5GHUB.US
Make sure when you connect the USB-to-UART cable, it shows correctly in Windows device manager
and all its driver is installed as in this screenshot.
13 Using Serial Terminal
It is recommended to use Tera Term tool as the serial terminal. You can download it from here:
https://osdn.net/projects/ttssh2/downloads/54081/teraterm-4.72.exe/
Launch Tera Terminal and select the Serial option and select USB-to-Serial port.