QCA4020
Table Of Contents
- Purpose of the Document
- Document History
- 1 Introduction
- 2 QCA4020 miniPCIe Layout
- 3 QCA4020 miniPCIe Pin Out
- 4 How to flash Image to QCA4020 miniPCIe
- 5 QCA4020 Pin Out
- 6 Software Tools to be Installed
- 7 Setting Up the Software Development Environment
- 8 Importing “Hello World” Application
- 9 Building “Hello World” Application
- 10 Flash the Application to the QCA4020 miniPCIe using USB
- 11 Flash the Application to the QCA4020 miniPCIe using JTAG
- 12 Connecting QCA4020 to Serial Terminal Through UART
- 13 Using Serial Terminal
- 14 QCLI Demo Application
13
QCA4020 miniPCIe Copyright © 5GHUB.US
C:\Program Files\OpenOCD-20170609\bin
set path as follows:
set %PATH%=%PATH%:C:\Program Files\OpenOCD-20170609\bin
7.4 GNU ARM Toolchain
Install the ARM toolchain by running the “.exe” file and make sure you select the option to “Add path to
environment variables” during the final step.
7.5 Setup OpenOCD Plugin Usage with Eclipse
Do the following steps:
1- Go to Help > Install new software in EclipseIDE and make sure the following plugin are installed and
enabled by default.