QCA4020
Table Of Contents
- Purpose of the Document
- Document History
- 1 Introduction
- 2 QCA4020 miniPCIe Layout
- 3 QCA4020 miniPCIe Pin Out
- 4 How to flash Image to QCA4020 miniPCIe
- 5 QCA4020 Pin Out
- 6 Software Tools to be Installed
- 7 Setting Up the Software Development Environment
- 8 Importing “Hello World” Application
- 9 Building “Hello World” Application
- 10 Flash the Application to the QCA4020 miniPCIe using USB
- 11 Flash the Application to the QCA4020 miniPCIe using JTAG
- 12 Connecting QCA4020 to Serial Terminal Through UART
- 13 Using Serial Terminal
- 14 QCLI Demo Application
11
QCA4020 miniPCIe Copyright © 5GHUB.US
P2 - PIN 13 GPIO28_BE
P2 - PIN 14 GPIO30_BE
P2 - PIN 15 GPIO31_BE
P2 - PIN 16 GPIO32_BE
P2 - PIN 17 GPIO33_BE
P2 - PIN 18 GND
P1 - PIN 10
A0
(SENSEADC_1_BE)
P1 - PIN 9
A1
(SENSEADC_0_BE)
P1 - PIN 8 GPIO_41_ BE
P1 – PIN 7 GPIO48_BE
P1 - PIN 6 GPIO49_BE
P1 - PIN 5 GPIO54_BE
SENSEADC 2
P1 - PIN 4 GPIO55_BE
SENSEADC 3
P1 - PIN 3 GPIO56_BE
SENSEADC 4
P1 - PIN 2 GPIO57_BE
SENSEADC 5
P1 - PIN 1 GPIO58_BE
SENSEADC 6