LC29D
Table Of Contents
- Purpose of the Document
- Document History
- 1 Package Contents
- 2 Introduction
- 3 Typical Applications
- 4 GNSS Constellations
- 5 Augmentation System
- 6 Hardware Board and Case Diagram
- 7 Connecting using the UART or SPI
- 8 Using Serial Terminal
- 9 DR Configuration
- 10 Mounting
- 11 Dead-Reckoning Calibration
- 12 Enable Dead-Reckoning and 6-axis Sensor
- 13 Sensor Messages
- 14 Using QGNSS Tool
- 15 Using Arduino IDE
5
GNSS Board v1.0 Copyright © 5GHUB.US
1 Package Contents
1.1 GNSS Sensor board
• GNSS sensor board
1.2 Download
Arduino sketches for the GNSS board can be downloaded from the following website:
https://github.com/5ghub/5G-NB-IoT/tree/master/KitSketches
QNSS Tool is here:
5G-NB-IoT/Tools at master · 5ghub/5G-NB-IoT (github.com)
To use the board with Arduino IDE and starts running Arduino projects and sketches, install the
following software:
Install Arduino IDE for Windows from the following website:
https://www.arduino.cc/en/Main/Software
Download and install Arduino library (5G-NB-IoT_Arduino.zip) here:
https://github.com/5ghub/5G-NB-IoT