User's Manual

44 | Product Options

Aprisa SR User Manual

Cabling Options

The following converter cables are available as Aprisa SR accessories to provide the customer interface.

The kit contains a USB connector retention clip (see USB Retention Clip below):

1. USB Converter to 1.8 metre multi-strand cable 6 wire for termination of customer connector

Part Number

APSA-IFCA-USB-MS-18

4RF SR Acc, Cable, Interface, USB Converter, Multi-strand, 1.8m

2. USB converter to RJ45 female kit for USB to RS-232 DCE conversion.

Part Number

APSA-KFCA-USB-45-MF-18

4RF SR Acc, Kit, Interface, USB Converter, RJ45, Female, 1.8m

3. USB converter to DB9 female kit for USB to RS-232 DCE conversion.

Part Number

APSA-KFCA-USB-D9-MF-18

4RF SR Acc, Kit, Interface, USB Converter, DB9, Female, 1.8m

USB Retention Clip

The USB Retention Clip attaches to the underside of the Aprisa SR enclosure adjacent to the USB

connector.

To attach the USB Retention Clip:

1. Clean the enclosure surface where the retention clip will attach with an alcohol based cleaner e.g.

Isopropanol.

2. Peel off the retention clip protective backing.

3. Stick the clip onto the SR enclosure ensuring that it aligns to the middle of the radio USB connector.