User's Manual

34 | Product Options
Aprisa SR User Manual
Installation
Mounting
The Aprisa SR Protected Station is designed to mount in a standard 19 inch rack.
Cabling
The Aprisa SR Protected Station is delivered pre-cabled with power, interface, management and RF
cables.
The set of interconnect cables is available as a spare part (see ‘Spares’ on page 37).
Power
A +10.5 to +30 V DC external power source must be connected to both the A and B Phoenix Contact 2 pin
male power connectors located on the protected station front panel. The A power input powers the A
radio and the B power input powers the B radio. The protection switch is powered from the A power input
or the B power input (which ever is available). The maximum combined power consumption is 35 Watts.