User Manual

Compliance ETSI
The terminal is designed to comply with the European Telecommunications Standards Institute (ETSI)
specifications as follows:
Radio performance EN 302 217 Parts 1, 2.1, and 2.2
EMC EN 301 489 Parts 1 & 4
Environmental EN 300 019, Class 3.2
Safety EN 60950
A terminal operating in the following frequency bands / channel sizes has been tested
and is compliant to the ETSI radio specifications and suitably displays the CE logo.
Other bands are compliant to the same radio performance specifications as adapted by
4RF and therefore may be used in regions where compliance requirements demand
CE performance at other frequencies.
Frequency band Channel size Power input Notified
body
300 MHz
400 MHz
25 kHz, 50 kHz, 75 kHz, 150 kHz,
250 kHz, 500 kHz, 1.0 MHz,
1.75 MHz, 3.50 MHz
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
Notified
Body 0678
600 MHz
700 MHz
800 MHz
900 MHz
500 kHz 12 VDC, 24 VDC,
48 VDC, 115/230 VAC
Notified
Body 0678
1400 MHz 75 kHz, 150 kHz, 250 kHz,
500 kHz, 1.0 MHz, 1.75 MHz,
3.50 MHz
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
2000 MHz
2500 MHz
250 kHz, 500 kHz, 1.0 MHz,
1.75 MHz, 3.50 MHz, 7 MHz,
14 MHz
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
Compliance FCC
The terminal is designed to comply with the Federal Communications Commission (FCC)
specifications as follows:
Radio performance / EMC
(dependant on variant)
47CFR part 90 Private Land Mobile Radio Services
47CFR part 101 Fixed Microwave Services
47CFR part 15 Radio Frequency Devices
Safety EN 60950
Available in 1Q 2007
Frequency band Channel size Power input FCC ID
400 MHz 25 kHz 48 VDC
900 MHz 100 kHz 48 VDC
900 MHz 200 kHz 48 VDC Verified part
101