User's Manual
Table Of Contents
- 1. Getting started
- 2. Introduction
- 3. Preparation
- 4. About the terminal
- 5. Mounting and installing the terminal
- 6. Connecting to the terminal
- 7. Managing the terminal
- 8. Configuring the terminal
- 9. Configuring the traffic interfaces
- 10. Cross Connections
- Embedded cross connect switch
- The Cross Connections application
- The Cross Connections system requirements
- Installing the Cross Connections application
- Opening the Cross Connections application
- The Cross Connections page
- Setting the terminal's address
- Management and user ethernet capacity
- Setting card types
- Getting cross connection configuration from the terminals
- Creating cross connections
- Sending cross connection configuration to the terminals
- Saving cross connection configurations
- Using existing cross connection configurations
- Printing the cross connection configuration
- Deleting cross connections
- Configuring the traffic cross connections
- Cross connection example
- Symmetrical Connection Wizard
- 11. Protected terminals
- 12. In-service commissioning
- What you will need
- Checking the antenna polarization
- Visually aligning antennas
- Accurately aligning the antennas
- Synchronizing the terminals
- Checking performance
- Checking the receive input level
- Checking the fade margin
- Checking long-term BER
- Bit Error Rate tests
- Additional tests
- Checking the link performance
- Viewing a summary of the link performance
- What you will need
- 13. Maintenance
- 14. Troubleshooting
- 15. Interface connections
- 16. Alarm types and sources
- 17. Country specific settings
- 18. Specifications
- Ethernet interface
- QJET Quad E1 / T1 interface
- Q4EM Quad 4 wire E&M interface
- DFXO Dual foreign exchange office interface
- DFXS Dual foreign exchange subscriber interface
- QV24 Quad V.24 asynchronous data interface
- HSS Single high speed synchronous data interface
- External alarm interfaces
- Auxiliary interfaces
- AC Power supply
- DC Power supply
- Power consumption
- MHSB protection
- Ethernet interface
- 19. Product end of life
- 20. Abbreviations
- 21. Acknowledgments and licensing
- 22. Commissioning Forms
- 23. Index
Index | 267
23. Index
2
2 wire .............................................................. 91
4
4 wire .............................................................. 89
A
AC power supply ............................................ 35
access rights................................................... 57
accessory kit................................................... 17
AIS................................................................ 206
alarms
alarm summary........................................ 199
clearing alarms........................................ 203
E1 / T1 alarm conditions ......................... 206
external...................................................... 31
history...................................................... 201
identifying causes.................................... 204
interface alarms....................................... 202
termination................................................. 31
types........................................................ 229
A-law............................................................... 94
altitude ............................................................ 23
antennas
aligning .................................................... 165
checking polarization............................... 165
corner reflector .......................................... 21
directional antennas ............................ 19, 20
installing .................................................... 30
parabolic.................................................... 19
selection and siting.................................... 19
siting .......................................................... 21
yagi............................................................ 20
attenuators...................................................... 37
B
balun transformer ......................................... 212
basic terminal settings.................................... 64
bench setup .................................................... 37
BER .............................................................. 171
browser cache, clearing ............................... 180
C
cabling
accessory kit.............................................. 17
coaxial feeder ...................................... 22, 37
for protected terminals ............................ 157
shielded ................................................... 218
cache, clearing ..................................... 179, 180
CAS ........................................ 94, 136, 137, 138
Castle Rock.................................................... 67
CD contents ................................................... 16
clock source
setting for .......................................... 87, 109
compatibility of interfaces............................. 133
configuration files ......................................... 182
configuration, saving .............................. 66, 130
constellation analyser................................... 173
corner reflector antenna................................. 21
country specific settings............................... 235
cross connections
creating ................................................... 127
deleting.................................................... 132
drop and insert ........................................ 129
point to point ........................................... 127
printing .................................................... 131
saving configurations .............................. 130
selecting timeslots................................... 139
sending configurations............................ 130
Symmetrical Connection Wizard............. 148
cross connections application
about ....................................................... 123
ethernet capacity..................................... 125
getting configurations.............................. 126
installing .................................................. 122
toolbar ..................................................... 124
total assigned link capacity ..................... 123
user capacity........................................... 125
Cross Connections application
required system configuration for ........... 121
D
DC power supply............................................ 32
DCD mode ................................................... 113
declaration of conformity.................................. iii
DFXO interface card .................................... 101
country specific settings.......................... 235
cross connections for .............................. 144
interface connections for......................... 218
port settings for ....................................... 101
signalling for............................................ 144
DFXS interface card....................................... 94
country specific settings.......................... 235
cross connections for .............................. 144
interface connections for......................... 217
port settings for ......................................... 94
signalling for............................................ 144
directional antennas ................................. 19, 20
Drop & Insert capacity.................................. 124
DSR DTR mode ........................................... 112
E
E&M interface................................................. 89
E1