User's Manual

4 |

Aprisa UIP4RF55 Module User Manual 1.0

Compliance General

The Aprisa UIP4RF55 module operates within frequency bands that are controlled through spectrum license

managed by the carriers

. Devices using these frequencies must meet the FCC regulatory requirements in

addition to any requirements put in place by the carriers.

It is the responsibility of the user, before operating the equipment, to ensure that where required the

appropriate regulatory and regional carrier requirements have been met.

Changes or modifications not approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Equipment authorizations sought by 4RF are based on the Aprisa UIP4RF55 module being installed at a fixed

restricted access location and operated within the environmental profiles defined in Table 1; operation

outside these criteria may invalidate the authorizations and / or license conditions.

Table 1 General Compliance

Environmental

Storage: EN 300 019-1-1 Class 1.2

Transportation: EN 300 019-1-2 Class 2.3

Stationary use: EN 300 019-1-3 Class 3.3

Mobile use: EN 300 019-1-5 Class 5.1

Vehicle

ISO 7637-2, ISO 16750-2 (12V Code D 24V Code E)

Shock & Vibration: SAE J1455

Safety

UL 62368-1, Class 1 division 2, Groups ABCD for

hazardous locations

Compliance United States of America FCC

The Aprisa LTE router may contain an UIP4RF55 LTE module and/or a WLAN Network module certified to

Federal Communications Commission (FCC) specifications defined in Table 2:

Table 2 USA Compliance

WWAN (LTE)

47 CFR Parts 22, 24, 27, 90 and 96

This device complies with part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference.

The carriers are the mobile phone carriers such as Verizon, AT&T, Vodafone etc.